|
4通道定址光場景控制器TEC-AC410LE
四通道調光輸出，每通道最大電流AC 10A；每一個通道均具備10A 空氣開關保護；共有1024級亮度調節；一個網路中具備256個區域以及65536個通道，如何設備中每一個均可任意定址；採用RS485介面；相容DMX512協議；本機可以存儲256種場景；適用於白熾燈、射燈等AC供電燈具。
TEC-AC410LE is a 4 channel energy management controller with a maximum load per channel of 10A. Build in TEC-net protocol, The TEC-AC410LE can be configured with smart control panels (Touch Screen) and TopSemi Lighting Control Managed Software, it can provide maximum 256 preset scenes for entry, set-up, cleaning and presentations.
 
Technical Data
Model No.:TEC-AC410LE
Supply voltage/ working voltage: AC220V, 50/60Hz single phase at 40A
Maximum Load: 10Aper channel
Load Types: Incandescent Lamps
Low voltage electronic transformers
Neon / Cold-cathode
Fade Times: 0-60 minutes
Memory: EEprom for 256 scenes memory
Resolution: 256 grades continually dimming process
Emergency protection: Failure to “ON” safety feature
Failure protection: 4 x Manual bypass switches
Construction: Wall mounted steel case
Dimension: 300(H) x243(W) x83(D)mm
Working temperature: 0℃to 40℃
Weight: 4kg
FEATURES:
Four dimmable channels rated at 10Amp output
10A MCB protected for each channels
Most types of Incandescent, low voltage lamp and inductive loads
256 grades continually dimming process
Four Manual bypass switches
Lightning protection
Failure to “ON” safety feature
Distributed network
Up to 65,536 channels and 256 Area per network.
Channel Addressable. Every Channel could be assign to any area individually.
Dual addressing mode manages physical address and logical address. Scenes preset, area setup, unite, partition flexibly online with TopSemi Lighting Management software.
EEprom memory, to prevent memory loss after power failure
RS485 TEC-NET serial port
DMX512 compatible
256 scenes memory
Diagnostic LED
<< 上一章 返回目錄 下一章 >>
十多年的豐富經驗、業內資深專家，東訊電子為您提供電子設計與批量定制一站式服務，歡迎您的光臨！
珠海市東訊電子有限公司 TopSemi Electronics Co.,Ltd
廣東省珠海市吉大石花西路42號協和大廈3樓
Add：3/F XieHe Building, No. 42 ShiHuaXi Road, JiDa District, Zhuhai, P.R.China
電話Tel：+86-756-2123486
傳真Fax：+86-756-2123487
| 
